Not doing {% if matrix_admin %} checks in the YAML also fixes some issues
with indentation being incorrect sometimes.
This should be backward compatible, except for mautrix-signal's case
where `matrix_mautrix_signal_bridge_permissions` previously existed
as a string, not a dictionary. `tasks/validate_config.yml` will catch
the problem an even provide a quick fix.
People often report and ask about these "failures".
More-so previously, when the `docker kill/rm` output was collected,
but it still happens now when people do `systemctl status
matrix-something` and notice that it says "FAILURE".
Suppressing to avoid further time being wasted on saying "this is
expected".
"Community" support
- has been removed from mautrix/facebook in v0.3.3:
31cac6fb5e
- has been removed from mautrix/signal in v0.2.2:
1f27a608a6
- will be removed in the next mautrix/instagram release:
e2ae1ca503
- will be removed in the next mautrix/twitter release:
3893075265
Reverts b1b4ba501f, 90c9801c56, a3c84f78ca, ..
I haven't really traced it (yet), but on some servers, I'm observing
`ansible-playbook ... --tags=start` completing very slowly, waiting
to stop services. I can't reproduce this on all Matrix servers I manage.
I suspect that either the systemd version is to blame or that some
specific service is not responding well to some `docker kill/rm` command.
`ExecStop` seems to work great in all cases and it's what we've been
using for a very long time, so I'm reverting to that.
If they do, our next playbook runs would simply revert it
and report "changed" for that task.
There's no benefit to letting the bridge spew a new config file.
This does not apply to the mautrix whatsapp bridge, because that one
is written in Go (not Python) and takes different flags. There's no
equivalent flag there.
These are just defensive cleanup tasks that we run.
In the good case, there's nothing to kill or remove, so they trigger an
error like this:
> Error response from daemon: Cannot kill container: something: No such container: something
and:
> Error: No such container: something
People often ask us if this is a problem, so instead of always having to
answer with "no, this is to be expected", we'd rather eliminate it now
and make logs cleaner.
In the event that:
- a container is really stuck and needs cleanup using kill/rm
- and cleanup fails, and we fail to report it because of error
suppression (`2>/dev/null`)
.. we'd still get an error when launching ("container name already in use .."),
so it shouldn't be too hard to investigate.
I had intentionally held it back in 39ea3496a4
until:
- it received more testing (there were a few bugs during the
migration, but now it seems OK)
- this migration guide was written
If a service is enabled, a database for it is created in postgres with a uniqque password. The service can then use this database for data storage instead of relying on sqlite.
The Docker 19.04 -> 20.10 upgrade contains the following change
in `/usr/lib/systemd/system/docker.service`:
```
-BindsTo=containerd.service
-After=network-online.target firewalld.service containerd.service
+After=network-online.target firewalld.service containerd.service multi-user.target
-Requires=docker.socket
+Requires=docker.socket containerd.service
Wants=network-online.target
```
The `multi-user.target` requirement in `After` seems to be in conflict
with our `WantedBy=multi-user.target` and `After=docker.service` /
`Requires=docker.service` definitions, causing the following error on
startup for all of our systemd services:
> Job matrix-synapse.service/start deleted to break ordering cycle starting with multi-user.target/start
A workaround which appears to work is to add `DefaultDependencies=no`
to all of our services.
Depending on the distro, common commands like sleep and chown may either
be located in /bin or /usr/bin.
Systemd added path lookup to ExecStart in v239, allowing only the
command name to be put in unit files and not the full path as
historically required. At least Ubuntu 18.04 LTS is however still on
v237 so we should maintain portability for a while longer.
Using a separate directory allows easier backups
(only need to back up the Ansible playbook configuration and the
bridge's `./data` directory).
The playbook takes care of migrating an existing database file
from the base directory into the `./data` directory.
In the future, we can also mount the configuration read-only,
to ensure the bridge won't touch it.
For now, mautrix-facebook is keen on rebuilding the `config.yaml`
file on startup though, so this will have to wait.
Related to #193, but for the Facebook bridge.
(other bridges can be changed to do the same later).
This patch makes the bridge configuration entirely managed by the
Ansible playbook. The bridge's `config.yaml` and `registration.yaml`
configuration files are regenerated every time the playbook runs.
This allows us to apply updates to those files and to avoid
people having to manage the configuration files manually on the server.
-------------------------------------------------------------
A deficiency of the current approach to dumping YAML configuration in
`config.yaml` is that we strip all comments from it.
Later on, when the bridge actually starts, it will load and redump
(this time with comments), which will make the `config.yaml` file
change.
Subsequent playbook runs will report "changed" for the
"Ensure mautrix-facebook config.yaml installed" task, which is a little
strange.
We might wish to improve this in the future, if possible.
Still, it's better to have a (usually) somewhat meaningless "changed"
task than to what we had -- never rebuilding the configuration.
Bridges start matrix-synapse.service as a dependency, but
Synapse is sometimes slow to start, while bridges are quick to
hit it and die (if unavailable).
They'll auto-restart later, but .. this still breaks `--tags=start`,
which doesn't wait long enough for such a restart to happen.
This attempts to slow down bridge startup enough to ensure Synapse
is up and no failures happen at all.
