Reverts b1b4ba501f, 90c9801c56, a3c84f78ca, ..
I haven't really traced it (yet), but on some servers, I'm observing
`ansible-playbook ... --tags=start` completing very slowly, waiting
to stop services. I can't reproduce this on all Matrix servers I manage.
I suspect that either the systemd version is to blame or that some
specific service is not responding well to some `docker kill/rm` command.
`ExecStop` seems to work great in all cases and it's what we've been
using for a very long time, so I'm reverting to that.
Until now, we were leaving services "enabled"
(symlinks in /etc/systemd/system/multi-user.target.wants/).
We clean these up now. Broken symlinks may still exist in older
installations that enabled/disabled services. We're not taking care
to fix these up. It's just a cosmetic defect anyway.
These are just defensive cleanup tasks that we run.
In the good case, there's nothing to kill or remove, so they trigger an
error like this:
> Error response from daemon: Cannot kill container: something: No such container: something
and:
> Error: No such container: something
People often ask us if this is a problem, so instead of always having to
answer with "no, this is to be expected", we'd rather eliminate it now
and make logs cleaner.
In the event that:
- a container is really stuck and needs cleanup using kill/rm
- and cleanup fails, and we fail to report it because of error
suppression (`2>/dev/null`)
.. we'd still get an error when launching ("container name already in use .."),
so it shouldn't be too hard to investigate.
If a service is enabled, a database for it is created in postgres with a uniqque password. The service can then use this database for data storage instead of relying on sqlite.
The Docker 19.04 -> 20.10 upgrade contains the following change
in `/usr/lib/systemd/system/docker.service`:
```
-BindsTo=containerd.service
-After=network-online.target firewalld.service containerd.service
+After=network-online.target firewalld.service containerd.service multi-user.target
-Requires=docker.socket
+Requires=docker.socket containerd.service
Wants=network-online.target
```
The `multi-user.target` requirement in `After` seems to be in conflict
with our `WantedBy=multi-user.target` and `After=docker.service` /
`Requires=docker.service` definitions, causing the following error on
startup for all of our systemd services:
> Job matrix-synapse.service/start deleted to break ordering cycle starting with multi-user.target/start
A workaround which appears to work is to add `DefaultDependencies=no`
to all of our services.
`-v` magically creates the source destination as a directory,
if it doesn't exist already. We'd like to avoid this magic
and the potential breakage that it might cause.
We'd rather fail while Docker tries to find things to `--mount`
than have it automatically create directories and fail anyway,
while having contaminated the filesystem.
There's a lot more `-v` instances remaining to be fixed later on.
This is just some start.
Things like `matrix_synapse_container_additional_volumes` and
`matrix_nginx_proxy_container_additional_volumes` were not changed to
use `--mount`, as options for each one are passed differently
(`ro` is `ro`, but `rw` doesn't exist and `slave` is `bind-propagation=slave`).
To avoid breaking people's custom volume mounts, we keep it as it is for now.
A deficiency with `--mount` is that it lacks the `z` option (SELinux
ownership changes), and some of our `-v` instances use that. I'm not
sure how supported SELinux is for us right now, but it might be,
and breaking that would not be a good idea.
Depending on the distro, common commands like sleep and chown may either
be located in /bin or /usr/bin.
Systemd added path lookup to ExecStart in v239, allowing only the
command name to be put in unit files and not the full path as
historically required. At least Ubuntu 18.04 LTS is however still on
v237 so we should maintain portability for a while longer.
This is mostly here to guard against problems happening
due to server migration and doing `chown -R matrix:matrix /matrix`.
Normally, the file is owned by `1000:1000`, as expected.
If ownership changes, Dimension could still start, but it will fail the
first time it tries to write to the database. Explicitly chowning
before startup guards against this.
Related to #485 and #486 (Github Pull Requests).
Also related to ccc7aaf0ce.
Dimension runs as the `node` user in the container (`1000:1000`).
It doesn't seem like we have a way around it. Thus, its configuration
must also be readable by that user (or group, in this case).
Ansible will migrate the ownership of the base path and config path, but
manual intervention will be required in order to migrate the ownership
of files in those directories (i.e. dimension.db).
Stop the services:
(local)$ ansible-playbook -i inventory/hosts setup.yml --tags=stop
Fix the permissions on the server:
(server)# chown -Rv "{{ matrix_user_username }}:{{ matrix_user_username }}" "{{ matrix_dimension_base_path }}"
which would typically look like:
(server)# chown -Rv matrix:matrix /matrix/dimension/
Reconfigure Dimension and start the services:
(local)$ ansible-playbook -i inventory/hosts setup.yml --tags=setup-dimension,start
We do use some `:latest` images by default for the following services:
- matrix-dimension
- Goofys (in the matrix-synapse role)
- matrix-bridge-appservice-irc
- matrix-bridge-appservice-discord
- matrix-bridge-mautrix-facebook
- matrix-bridge-mautrix-whatsapp
It's terribly unfortunate that those software projects don't release
anything other than `:latest`, but that's how it is for now.
Updating that software requires that users manually do `docker pull`
on the server. The playbook didn't force-repull images that it already
had.
With this patch, it starts doing so. Any image tagged `:latest` will be
force re-pulled by the playbook every time it's executed.
It should be noted that even though we ask the `docker_image` module to
force-pull, it only reports "changed" when it actually pulls something
new. This is nice, because it lets people know exactly when something
gets updated, as opposed to giving the indication that it's always
updating the images (even though it isn't).
Reasoning is the same as for matrix-org/synapse#5023.
For us, the journal used to contain `docker` for all services, which
is not very helpful when looking at them all together (`journalctl -f`).
