STOP Example

NOTE: This is written for the BS2p and will also run on the BS2pe and BS2px. Modify the $STAMP directive (as required) before downloading to the BS2pe or BS2px.

' STOP.BS2
' This program is similar to SLEEP.BS2 except that the LED will not blink
' since the BASIC Stamp does not go into low power mode.  Use the circuit
' shown in the description of the SLEEP command for this example.

' {$STAMP BS2}
' {$PBASIC 2.5}


Main:
  LOW 0                                 ' turn LED on
  STOP