72 lines
5.1 KiB
Markdown
72 lines
5.1 KiB
Markdown
# Configuring your DNS server
|
|
|
|
To set up Matrix on your domain, you'd need to do some DNS configuration.
|
|
|
|
To use an identifier like `@<username>:<your-domain>`, you don't actually need
|
|
to install anything on the actual `<your-domain>` server.
|
|
|
|
You do, however need to instruct the Matrix network that Matrix services for `<your-domain>` are delegated
|
|
over to `matrix.<your-domain>`.
|
|
As we discuss in [Server Delegation](howto-server-delegation.md), there are 2 different ways to set up such delegation:
|
|
|
|
- using a `https://<your-domain>/.well-known/matrix/server` file (on the base domain!)
|
|
- using DNS SRV records
|
|
|
|
This playbook mostly discusses the well-known file method, because it's easier to manage with regard to certificates.
|
|
If you decide to go with the alternative method ([Server Delegation via a DNS SRV record (advanced)](howto-server-delegation.md#server-delegation-via-a-dns-srv-record-advanced)), please be aware that the general flow that this playbook guides you through may not match what you need to do.
|
|
|
|
To make matters worse, for backward compatibility until the Synapse server reaches v1.0, you need to set up a DNS SRV record anyway.
|
|
So don't be confused if the general flow of this playbook asks you for both DNS SRV records and for setting up a well-known file.
|
|
It's a temporary requirement during the Synapse v0.99/v1.0 transition.
|
|
|
|
|
|
## General outline of DNS settings you need to do
|
|
|
|
| Type | Host | Priority | Weight | Port | Target |
|
|
| ----- | ----------------------- | -------- | ------ | ---- | ---------------------- |
|
|
| A | `matrix` | - | - | - | `matrix-server-IP` |
|
|
| CNAME | `riot` | - | - | - | `matrix.<your-domain>` |
|
|
| CNAME | `dimension` | - | - | - | `matrix.<your-domain>` |
|
|
| SRV | `_matrix._tcp` | 10 | 0 | 8448 | `matrix.<your-domain>` |
|
|
| SRV | `_matrix-identity._tcp` | 10 | 0 | 443 | `matrix.<your-domain>` |
|
|
|
|
The `_matrix._tcp` SRV record is a temporary measure and will not be necessary in the near future.
|
|
In fact, it will have to be removed at some point. To learn more about that, read below.
|
|
|
|
|
|
## Subdomains setup
|
|
|
|
As the table above illustrates, you need to create 2 subdomains (`matrix.<your-domain>` and `riot.<your-domain>`) and point both of them to your new server's IP address (DNS `A` record or `CNAME` record is fine).
|
|
|
|
The `riot.<your-domain>` subdomain is necessary, because this playbook installs the Riot web client for you.
|
|
If you'd rather instruct the playbook not to install Riot (`matrix_riot_web_enabled: false` when [Configuring the playbook](configuring-playbook.md) later), feel free to skip the `riot.<your-domain>` DNS record.
|
|
|
|
The `dimension.<your-domain>` subdomain is necessary, because this playbook installs the Dimension integrations manager for you. Dimension installation is disabled by default and if you explicitly do not enable it's installation (`matrix_dimension_enabled: true` when [Configuring the playbook](configuring-playbook.md) later), feel free to skip the `dimension.<your-domain>` DNS record.
|
|
|
|
|
|
## `_matrix._tcp` SRV record setup (temporary requirement)
|
|
|
|
All services created by this playbook are meant to be installed on their own server (such as `matrix.<your-domain>`).
|
|
|
|
To use a Matrix user identifier like `@<username>:<your-domain>` while hosting services on `matrix.<your-domain>`, we need to instruct the Matrix network of such a delegation/redirection by means of setting up a DNS SRV record.
|
|
|
|
The SRV record should look like this:
|
|
- Name: `_matrix._tcp` (use this text as-is)
|
|
- Content: `10 0 8448 matrix.<your-domain>` (replace `<your-domain>` with your own)
|
|
|
|
A [new file-based mechanism for Federation Server Discovery](configuring-well-known.md#introduction-to-federation-server-discovery) is superseding the `_matrix._tcp` SRV record. **During the transition phase, you'll need to set up both mechanisms**. We'll instruct you how to set up the file-based mechanism after the [installation phase](installing.md) for this playbook.
|
|
|
|
Doing delegation/redirection of Matrix services using a DNS SRV record (`_matrix._tcp`) is a **temporary measure** that is only necessary before Synapse v1.0 is released.
|
|
|
|
As more and more people upgrade to the Synapse v0.99 transitional release and just before the final Synapse v1.0 gets released, at some point in the near future **you will need to remove the `_matrix._tcp` SRV record** and leave only the [new file-based mechanism for Federation Server Discovery](configuring-well-known.md#introduction-to-federation-server-discovery) in place.
|
|
|
|
|
|
## `_matrix-identity._tcp` SRV record setup
|
|
|
|
To make the [mxisd](https://github.com/kamax-io/mxisd) Identity Server (which this playbook installs for you) be authoritative for your domain name, set up one more SRV record that looks like this:
|
|
- Name: `_matrix-identity._tcp` (use this text as-is)
|
|
- Content: `10 0 443 matrix.<your-domain>` (replace `<your-domain>` with your own)
|
|
|
|
|
|
When you're done with the DNS configuration and ready to proceed, continue with [Configuring this Ansible playbook](configuring-playbook.md).
|