matrix-docker-ansible-deploy/docs/configuring-playbook-bridge-mautrix-meta-instagram.md

Setting up Instagram bridging via Mautrix Meta (optional)

The playbook can install and configure the mautrix-meta Messenger/Instagram bridge for you.

Since this bridge component can bridge to both Messenger and Instagram and you may wish to do both at the same time, the playbook makes it available via 2 different Ansible roles (matrix-bridge-mautrix-meta-messenger and matrix-bridge-mautrix-meta-instagram). The latter is a reconfigured copy of the first one (created by just rebuild-mautrix-meta-instagram and bin/rebuild-mautrix-meta-instagram.sh).

This documentation page only deals with the bridge's ability to bridge to Instagram. For bridging to Facebook/Messenger, see Setting up Messenger bridging via Mautrix Meta.

Migrating from the old mautrix-instagram bridge

If you've been using the mautrix-instagram bridge, you'd better get rid of it first or the 2 bridges will be in conflict:

• both trying to use @instagrambot:YOUR_DOMAIN as their username. This conflict may be resolved by adjusting matrix_mautrix_instagram_appservice_bot_username or matrix_mautrix_meta_instagram_appservice_username
• both trying to bridge the same DMs

To do so, send a clean-rooms command to the management room with the old bridge bot (@instagrambot:YOUR_DOMAIN).

This would give you a list of portals and groups of portals you may purge. Proceed with sending commands like clean recommended, etc.

Then, consider disabling the old bridge in your configuration, so it won't recreate the portals when you receive new messages.

Configuration

Most simply, you can enable the bridge with the following playbook configuration:

matrix_mautrix_meta_instagram_enabled: true

Before proceeding to re-running the playbook, you may wish to adjust the configuration further. See below.

Bridge permissions

By default, any user on your homeserver will be able to use the bridge.

Different levels of permission can be granted to users:

• relay - Allowed to be relayed through the bridge, no access to commands
• user - Use the bridge with puppeting
• admin - Use and administer the bridge

The permissions are following the sequence: nothing < relay < user < admin.

The default permissions are set via matrix_mautrix_meta_instagram_bridge_permissions_default and are somewhat like this:

matrix_mautrix_meta_instagram_bridge_permissions_default:
  '*': relay
  YOUR_DOMAIN: user
  '{{ matrix_admin }}': admin

If you don't define the matrix_admin in your configuration (e.g. matrix_admin: @user:YOUR_DOMAIN), then there's no admin by default.

You may redefine matrix_mautrix_meta_instagram_bridge_permissions_default any way you see fit, or add extra permissions using matrix_mautrix_meta_instagram_bridge_permissions_custom like this:

matrix_mautrix_meta_instagram_bridge_permissions_custom:
  '@YOUR_USERNAME:YOUR_DOMAIN': admin

You may wish to look at roles/custom/matrix-bridge-mautrix-meta-instagram/templates/config.yaml.j2 to find more information on the permissions settings and other options you would like to configure.

Set up Double Puppeting

If you'd like to use Double Puppeting (hint: you most likely do), you have 2 ways of going about it.

Method 1: automatically, by enabling Appservice Double Puppet or Shared Secret Auth

The bridge will automatically perform Double Puppeting if you enable the Appservice Double Puppet service or the Shared Secret Auth service for this playbook.

Enabling Appservice Double Puppet is the recommended way of setting up Double Puppeting, as it's easier to accomplish, works for all your users automatically, and has less of a chance of breaking in the future.

Enabling double puppeting by enabling the Shared Secret Auth service works at the time of writing, but is deprecated and will stop working in the future.

Method 2: manually, by asking each user to provide a working access token

Note: This method for enabling Double Puppeting can be configured only after you've already set up bridging (see Usage).

When using this method, each user that wishes to enable Double Puppeting needs to follow the following steps:

• retrieve a Matrix access token for yourself. Refer to the documentation on how to do that.

• send the access token to the bot. Example: login-matrix MATRIX_ACCESS_TOKEN_HERE

• make sure you don't log out the session for which you obtained an access token some time in the future, as that would break the Double Puppeting feature

Usage

You then need to start a chat with @instagrambot:YOUR_DOMAIN (where YOUR_DOMAIN is your base domain, not the matrix. domain).