e46ba5deba
Adds support for: https://src.miscworks.net/fair/matrix-appservice-kakaotalk This is pretty similar to https://github.com/spantaleev/matrix-docker-ansible-deploy/pull/1977 which just appeared, but has mostly been done independently. I've taken some inspiration and did some fixups based on that PR. Thanks to https://github.com/hnarjis for taking the time to contribute! Notable differences between this branch compared to that PR: - better naming and documentation around the "configuration" variables - no unnecessary (5 sec.) intentional delay when starting `matrix-appservice-kakaotalk-node.service` - stores configuration in `config/`, not in `data/` - passes configuration as read-only and starts the bridge with (`--no-update`) to ensure no changes are made to it - starts containers more securely - with `matrix:matrix` user:group (not `root`) and reduced capabilities (`--cap-drop=ALL`) - uses `tcp` for communication between the "node" and the appservice (simpler than sharing unix sockets) - `registration.yaml` which is closer to the one generated by `matrix-appservice-kakaotalk` (no `de.sorunome.msc2409.push_ephemeral` stuff, etc.) - `registration.yaml` which is more customizable (customizable bot username and prefix for puppets - see `matrix_appservice_kakaotalk_appservice_bot_username` and `matrix_appservice_kakaotalk_user_prefix`) - less fragile and more extensible bridge permissions configuration via `matrix_appservice_kakaotalk_bridge_permissions`. Doing `{% if matrix_admin %}` in the bridge configuration sometimes causes syntax problems (I hit some myself) and is not ideal. Other bridges should be redone as well. - configurable command prefix for the bridge, instead of hardcoding `!kt` (see `matrix_appservice_kakaotalk_command_prefix`) - logging that is more consistent with the rest of the playbook (console / journald only, no logging to files), as well as configurable log level (via `matrix_appservice_kakaotalk_logging_level`) - somewhat more detailed documentation (`docs/configuring-playbook-bridge-appservice-kakaotalk.md`) - removed some dead code (data relocation tasks from `tasks/setup_install.yml`, as well as likely unnecessary SQLite -> Postgres migration)
84 lines
4.0 KiB
Markdown
84 lines
4.0 KiB
Markdown
# Setting up Appservice Kakaotalk (optional)
|
|
|
|
The playbook can install and configure [matrix-appservice-kakaotalk](https://src.miscworks.net/fair/matrix-appservice-kakaotalk) for you. `matrix-appservice-kakaotalk` is a bridge to [Kakaotalk](https://www.kakaocorp.com/page/service/service/KakaoTalk?lang=ENG) based on [node-kakao](https://github.com/storycraft/node-kakao) (now unmaintained) and some [mautrix-facebook](https://github.com/mautrix/facebook) code.
|
|
|
|
See the project's [documentation](https://src.miscworks.net/fair/matrix-appservice-kakaotalk) to learn what it does and why it might be useful to you.
|
|
|
|
## Installing
|
|
|
|
To enable the bridge, add this to your `vars.yml` file:
|
|
|
|
```yaml
|
|
matrix_appservice_kakaotalk_enabled: true
|
|
```
|
|
|
|
You may optionally wish to add some [Additional configuration](#additional-configuration), or to [prepare for double-puppeting](#set-up-double-puppeting) before the initial installation.
|
|
|
|
After adjusting your `vars.yml` file, re-run the playbook and restart all services: `ansible-playbook -i inventory/hosts setup.yml --tags=setup-all,start`
|
|
|
|
To make use of the Kakaotalk bridge, see [Usage](#usage) below.
|
|
|
|
|
|
### Additional configuration
|
|
|
|
There are some additional things you may wish to configure about the bridge.
|
|
|
|
Take a look at:
|
|
|
|
- `roles/matrix-bridge-appservice-kakaotalk/defaults/main.yml` for some variables that you can customize via your `vars.yml` file
|
|
- `roles/matrix-bridge-appservice-kakaotalk/templates/config.yaml.j2` for the bridge's default configuration. You can override settings using the `matrix_appservice_kakaotalk_configuration_extension_yaml` variable
|
|
|
|
Here's some example configuration (which goes into your `vars.yml` file):
|
|
```yaml
|
|
# This configuration:
|
|
# - enables encryption (it's off by default)
|
|
# - grants some user on your homeserver 'admin' access to the bridge
|
|
# (note: the user specified in the `matrix_admin` (part of `roles/matrix-base/defaults/main.yml`) is made an admin by default)
|
|
matrix_appservice_kakaotalk_configuration_extension_yaml: |
|
|
bridge:
|
|
permissions:
|
|
'@YOUR_USERNAME:{{ matrix_domain }}': admin
|
|
|
|
encryption:
|
|
allow: true
|
|
default: true
|
|
```
|
|
|
|
|
|
### Set up Double Puppeting
|
|
|
|
If you'd like to use [Double Puppeting](https://docs.mau.fi/bridges/general/double-puppeting.html) (hint: you most likely do), you have 2 ways of going about it.
|
|
|
|
#### Method 1: automatically, by enabling Shared Secret Auth
|
|
|
|
The bridge will automatically perform Double Puppeting if you enable [Shared Secret Auth](configuring-playbook-shared-secret-auth.md) for this playbook.
|
|
|
|
This is the recommended way of setting up Double Puppeting, as it's easier to accomplish, works for all your users automatically, and has less of a chance of breaking in the future.
|
|
|
|
#### Method 2: manually, by asking each user to provide a working access token
|
|
|
|
**Note**: This method for enabling Double Puppeting can be configured only after you've already set up bridging (see [Usage](#usage)).
|
|
|
|
When using this method, **each user** that wishes to enable Double Puppeting needs to follow the following steps:
|
|
|
|
- retrieve a Matrix access token for yourself. You can use the following command:
|
|
|
|
```
|
|
curl \
|
|
--data '{"identifier": {"type": "m.id.user", "user": "YOUR_MATRIX_USERNAME" }, "password": "YOUR_MATRIX_PASSWORD", "type": "m.login.password", "device_id": "Appservice-Kakaotalk", "initial_device_display_name": "Appservice-Kakaotalk"}' \
|
|
https://matrix.DOMAIN/_matrix/client/r0/login
|
|
```
|
|
|
|
- send the access token to the bot. Example: `login-matrix MATRIX_ACCESS_TOKEN_HERE`
|
|
|
|
- make sure you don't log out the `Appservice-Kakaotalk` device some time in the future, as that would break the Double Puppeting feature
|
|
|
|
|
|
## Usage
|
|
|
|
Start a chat with `@kakaotalkbot:YOUR_DOMAIN` (where `YOUR_DOMAIN` is your base domain, not the `matrix.` domain).
|
|
|
|
Send `login --save EMAIL_OR_PHONE_NUMBER` to the bridge bot to enable bridging for your Kakaotalk account. The `--save` flag may be omitted, if you'd rather not save your password.
|
|
|
|
After successfully enabling bridging, you may wish to [set up Double Puppeting](#set-up-double-puppeting), if you haven't already done so.
|